BH7NOR & BG6QBV Firmware and software downloads
：
http://avrx.cn
- 10 -
Gateway use does not need to enable APRS relay function! ! !
Note：DIGI function : The AVRT7 plus could and olny could transfer data when there is a
external radio and after the DIGI is selected.
13.DIGI PATH
14. DIGI Beacon transmit audio modulation selection,
15. DIGI alias
16. WIFI SSID
17.
WIFI
PASS
18.
Write account and password to the WIFI module (see WIFI settings operation)
19.
LAN Port IP Assignment Selection, Custom IP or Router Auto Assignment (DHCP)
20.21.22.23.
Custom IP value
24.
Serial port selection (install USB serial port driver, see hardware manager COM)
25.
Connect the PC and AVRT7PLUS using a USB serial cable, select COM (24). AVRT7PLUS
data value can be read out by activation
26.
Load saved data
27.
Restore the default data value
28.
Write the current data value
29.
Save the current data value
30.
Display configuration software version
31.
After reading the data value (25), the AVRT7PLUS firmware version is displayed
32.
Select AVRT7PLUS firmware
33.
Update AVRT7PLUS firmware
34.
Operation status display
35.
Firmware update blue band prompt completion percentage. The blue band reaches to the
right and the firmware update is completed
36.
AVRT7 reboots
2.4G-WIFI setting : (use the router’s WIFI login ID and password)
Note 1, WIFI would be disabled when the network cable is plugged in, and the WIFI
setting only could be set up without the network cable.
Note 2, the power to stop, re-insert the power and USB serial cable boot. WIFI data
SSID and PASS, directly activate the "APPLY" write, the operation is prohibited
"read data (25)"
Note 3, the DC power supply must be plugged in when inputting the WIFI data.
