Radio Thermostat CT102 Скачать руководство пользователя страница 52

Страница: 52 / 56

CT102 Thermostat

Z Wave

4. C-Wire/Battery Status (8-bit)

If 0x01, the thermostat is powered by a C-wire. If 0x02, the

thermostat is powered by batteries.

5. Humidity Reporting Threshold (8-bit)

This value determines the reporting threshold when association

reporting is enabled. Unsupported values are ignored.

6. Auxiliary/Emergency (8-bit)

If set to 0, auxiliary / emergency heat is disabled. All other values

(1-255) enable auxiliary / emergency heat. This can only be

enabled when the thermostat is set to Heat Pump mode.

7. Thermostat Swing Temp

The thermostat swing temperature is in units of 0.5 degrees

Fahrenheit. A value of 0x01 is 0.5F and 0x02 is 1.0F. The supported

values may vary from thermostat to thermostat but typically the

allowed values are 0.5F (0x01) to 4.0F (0x08).

8. Thermostat Diff Temp

The thermostat differential temperature is in units of 0.5 degrees

Fahrenheit. A value of 0x04 is 2.0F and 0x06 is 3.0F. The differential

temperature must be an integer value. Non-integer values, such

as 1.5F (0x03), should not be used. The supported values may vary

from thermostat to thermostat but typically, the allowed values are

2.0F (0x04) to 6.0F (0x0C).

9. Thermostat Recovery Mode

The Thermostat Recovery Mode can be either fast (0x01) or

economy (0x02).

Содержание CT102

























































Результаты поиска

Содержание CT102

Отзывы:

Похожие инструкции для CT102

Бренды по названию

Популярные бренды

Radio Thermostat CT102, Руководство пользователя

Результаты поиска

Содержание CT102

Отзывы:

Похожие инструкции для CT102

Бренды по названию

Популярные бренды