4
STEP 4
ATTACH TO COLLAR
Note: Do not place unit on your dog without
reading the Training Section of this manual.
Collar material thickness should be
approximately 1/16", and no wider than 1".
Slide the collar under both brackets. Be
sure the unit is placed in the center of
the collar, opposite of the buckle, and fits
snugly against the middle of the dog’s
throat
(Figure 5)
. The microphone may
not detect a bark properly if the unit is
rotated to the side or if the collar hangs too
loosely. Remove any tags from the collar to
avoid triggering a false stimulation
(Figure 6)
.
� ��
������
���� ��
�����
