TEKCOM Industries Limited
Page 8 of 9
9. CH
/ CALL
Press
CH
to move one channel down. Press and hold
CH
for more than 1.5 seconds
to enter into call function. “ “Will be displayed.
A ringer sound on all radios tuned to the same FRS/GMRS channel and/or the privacy code
as your radio.
10.
VOX button / C-Tone / Key-Tone
Press “VOX” and it will display, VOX is activated, then press “VOX”. “VOX” will deactivated,
to adjust VOX knob will change sensitivity of VOX.
Press and hold the VOX for more than 1.5 seconds, C-Tone will flash. Press
or
to
switch the function to “ON” or “OF”. Press VOX again
will flash. Press
or
will
determine key-tone.
12. External Mic/Spk Jack
Connect an optional speaker/microphone or earphone in this jack.
14. M1 (M2 or M3)/ Dual Watch
Press M1 (M2 or M3) for more than 1.5 seconds to switch the unit to the channel and QUIET
code stored at this location.
Dual Watch
It can be activated or deactivated by pressing the MON key and follow by M1 (M2 or M3).
‘DUAL’ icon will be shown on the LCD if activate. During Dual-Watching, upon receiving a
signal from the normal working channel or M1 (M2 or M3) channel, the unit will stop at that
channel. If the signal is gone, the unit will resume Dual-Watch.
Note
: You can only communicate with another radio that is using the same channel and/or the
same quiet code as your radio.
