TEKCOM Industries Limited
Page 7 of 9
Skip
Press
MON
key and hold for more than 1.5 seconds, then press
CH
key to activate or
deactivate Skip function. Icon “ ” will be shown if activated.
6. Talk Botton
To talk, hold down the
Talk
. Speak into the microphone in a normal tone of voice when the
icons is displayed. When you finish speaking, release the
Talk
button.
7. MON Button / MCU Reset Button / Keylock
To hear everything happening on a channel, including weak transmission, hold down
MON
button for more than 1.5 seconds. Re lease the
MON
button to turn the auto-squelch back on.
Holding the
MON
button while turning on the radio will resume your radio’s MCU and the quiet
code will be reset to number 12, QUIET privacy mode operation is deactivated, keypad lock
disabled, backlight switched off and channel setting will go to number 1.
When the unit is reset, memory channel M1, M2, M3 will go to CH1, CH2, CH3 without QUIET
code.
Your can also lock your radio setting to avoid accidental pressing of keys by activating the
keypad lock. Press and hold the
MON
button, then press the
QUIET
button to activate or
deactivate the keypad lock.
8. QUIET /QUIET Scan Button
Press
QUIET
button to enable or disable the
QUIET
privacy mode operation.
a)
Hold down
QUIET
button for 2 seconds until
QUIET
is displayed and the quiet code
flashes.
b)
Repeatedly press (or hold down)
CH
or
CH
until you see the code number you want
to use.
c)
Press
QUIET
button to store the code.
To turn on the quiet feature, press
QUIET
.
QUIET
appears. To turn off the feature, press
QUIET
until
QUIET
disappears.
Note:
We recommend that you select a quiet code from the range 7-30. If you select a code
below or above that range, you must wait 1 to 2 seconds after holding down
TALK
before you
start talking.
QUIET Scanning
Press Quiet key for more than 1.5 seconds, then press “
” for 1.5 seconds, quiet begin
scanning, scan icons of “SCAN” will be lightened on LCD. When received the same QUIET
code, the scanning stops and will keep scanning after the signal disappears. Press any key
will exit and return to the normal working channel.