8
Follow these steps so the TAD can
record the correct day and time each
message and memo is recorded.
Note: If you do not complete each step
within 8 seconds, the TAD-779 sounds
three beeps and exits from setup. Start
again at Step 1.
1. Use a pointed object such as a
straightened paper clip to hold down
CLOCK
until the TAD-779 beeps and
announces the currently set day.
2. To change the day of the week,
repeatedly press
REPEAT
to move
backward or
SKIP
to move forward
until the TAD announces the desired
day of the week.
Illus. showing CLOCK
button.
Illus. showing OGM/REPEAT
and PLAY/SKIP.
3. Press
STOP
. The TAD-779 beeps
and announces the hour.
4. To change the hour, repeatedly
press
REPEAT
or
SKIP
.
5. Press
STOP
. The TAD-779 beeps
and announces the minutes.
6. To change the minutes, repeatedly
press
REPEAT
or
SKIP
.
Note: To change the time in 10-
minute increments, hold down
REPEAT
or
SKIP
.
7. Press
STOP
to confirm the settings.
The TAD beeps and announces the
day and time.
To check the current day and time at
any time, use a pointed object such as a
straightened paper clip to press
CLOCK
.
Illus. showing ANSWER/
STOP/DELETE.
43-779.fm Page 8 Monday, August 16, 1999 7:34 AM