16
USING FLASH
FLASH
performs the electronic equiva-
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press
FLASH
to answer an incoming
call without disconnecting the current
call. Press
FLASH
again to return to
the first call.
Note: If you do not have any special
phone services, pressing
FLASH
might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure
DIAL MODE
is set to
P
(pulse).
2. Lift the handset from the base or
press
TALK
.
3. Dial the service’s main number.
4. When the service answers, press
TONE/
. Any additional numbers
you dial are sent as tone signals.
5. After you complete the call, return
the handset to the base or press
TALK
. The phone automatically
resets to the pulse mode.
PAGING
To send a page from the base to the
handset, when the phone is not in use,
press
PAGE
on the base. The handset
beeps five times. If you hold down
PAGE
for more than 2 seconds, the
handset beeps for 1 minute.
43-776.fm Page 16 Friday, August 13, 1999 3:34 PM
