8
Warning: To avoid damage to both the power supply and the
device:
• Follow the correct polarity (+ to + and – to –) when you con-
nect the power supply and the device.
• Do not let the ends of the positive and negative wires touch
each other.
Notes:
• The binding posts’ wire holes can accommodate wire up to
14 gauge.
• Your local RadioShack store has a wide selection of banana
plugs and hook clips that are convenient for making the con-
nections to the binding posts.
5. Insert the device’s negative wire (usually black) into the black
binding post’s wire hole, then tighten the binding post’s sleeve
to secure the wire in place.
6. Plug the power supply’s power cord into a standard 120V AC
outlet. If you have difficulty inserting the plug, don’t force it.
Turn it over and reinsert it.
22-506.fm Page 8 Friday, August 6, 1999 12:55 PM
