![background image](http://html1.mh-extra.com/html/radio-shack/pro-93/pro-93_owners-manual_3532020024.webp)
24
Operation
in manual mode or while the scanner is receiving a sig-
nal during scanning. See “Changing the Open/Closed
Mode” on Page 64 for more information about setting the
open and closed modes.
ˆ
Operation
TURNING ON THE SCANNER AND
SETTING SQUELCH
1. Turn
SQUELCH
fully counterclockwise until the indi-
cator points to
MIN
before you turn on the scanner.
2. To turn on the scanner, turn
VOLUME
clockwise.
3<C:FD<ý 0Fý L8Cý 0ILEB@E>
3<C:FD<ý 0Fý L8Cý 0ILEB@E>
3<C:FD<ý 0Fý L8Cý 0ILEB@E>
3<C:FD<ý 0Fý L8Cý 0ILEB@E>
appears. After about 3
seconds, you hear a hissing sound.
3. Turn
SQUELCH
clockwise until the hissing sound
stops.
4. To turn off the scanner, turn
VOLUME
counterclock-
wise to
OFF
.
Notes:
• The scanner does not scan if there are no frequen-
cies stored in channels. If the scanner does not
scan and you have already stored frequencies in
channels, turn
SQUELCH
further clockwise.
• If the scanner picks up unwanted, partial, or very
weak transmissions, turn
SQUELCH
clockwise to
decrease the scanner's sensitivity to these signals.
If you want to listen to a weak or distant station, turn
SQUELCH
counterclockwise.
• If
SQUELCH
is adjusted so you always hear a hiss-
ing sound, the scanner will not scan properly.
• To ensure the scanner operates properly while in
the trunking mode, we suggest you set
SQUELCH
using the steps listed above.