Radio Shack PRO-528, Руководство пользователя

Страница: 49 / 92

49
Beyond the Basics
break, set this function to OFF . The
scanner does not check signals while
receiving an audio signal. The scanner
resumes checking signals when the
audio signal ends. If you want to keep
the Signal Stalker I active despite the
interruption, set this function to
ON .
• S-S.LOG : Lets you select the Signal
Stalker I logging setting.
When the scanner fi nds a strong
signal, it automatically saves the
signal to one of 10 log channels. If the
scanner
fi nds a new frequency after
the 10 log channels are fully stored
with frequencies, the oldest memory
is deleted and the new frequency is
stored in that channel. You can scan
the log channels along with the normal
1000 channels.
• The 10 log channels are located after
Channel 1000 and you can manually
access them by selecting channals
as Channel 1001, Channel 1002, ...
Channel 1010. “ -1- ”, “ -2- ”, ... “ -10- ”
appear as channel numbers.
You cannot program frequencies in the
log channels.
You can lock out the log channels like
normal channels.