29
TRANSFERRING A
FREQUENCY TO
ANOTHER CHANNEL
Transferring to an Empty
Channel
This feature lets you reassign a stored
frequency to another bank’s vacant
channel.
Note: You cannot transfer a frequency
into or out of a priority channel.
1. Press
MANUAL
to stop scanning.
2. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
3. Press
TRANSFER
. All bank indica-
tors flash on the display.
4. Use the number keys to select the
desired bank number. The fre-
quency is automatically trans-
ferred to the selected bank’s
lowest empty channel.
Note: If all that bank’s channels are
already used,
FULL
appears. In that
case, you can select another bank.
Transferring to a Channel that
has a Stored Frequency
1. Press
MANUAL
to stop scanning.
2. Press
FREQ/CHAN-LOCK
until
CHAN
appears on the display.
3. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
4. Press
TRANSFER
twice.
CH
flashes on the display.
5. Using the number keys or the
rotary tuner, select the desired
channel.
6. Press
s
to transfer the frequency.
Exchanging Frequencies
Between Two Programmed
Channels
1. Press
MANUAL
to stop scanning.
2. Press
FREQ/CHAN-LOCK
until
CHAN
appears.
3. Using the number keys or the
rotary tuner, select the channel
that has the frequency you want to
transfer.
4. Press
TRANSFER
twice.
CH
flashes on the display.
5. Using the number keys or the
rotary tuner, select the desired
channel.
6. Press
t
to exchange the frequen-
cies.
20-418.fm Page 29 Wednesday, August 4, 1999 12:42 PM