37
C
on
fig
ur
at
io
n
Programming FIPS Codes (iSCAN)
1.
Look up the FIPS code(s) for your area.
2.
Press
to activate Weather Mode, then press
MENU
.
3.
Scroll to
SAME 1 Tag
and press
to name the channel. Press
or
to change the character. Press
or
to move the cursor to another
character.
4.
Scroll down to
SAME 1 FIPS
and press
to enter a FIPS code. Press
or
to change the character. Press
or
to move the cursor to
another character.
5.
Scroll down to
SAME 1 Enable
and press
SEL
or
.
6.
To program other areas, repeat steps 3-5. You can program up to ten
FIPS code locations.
7.
When finished, select
Save Changes
and press
SEL
or
.
Importing Skywarn Frequencies (PC)
1.
Browse for Skywarn frequencies in the
iSCAN Library and import them to the
Skywarn playlist. (
TIP:
Browse in agencies
within your state, and look for “Severe
Weather” subgroups.)
2.
Import the frequencies as you normally
would, and assign them to the Skywarn
playlist.
3.
Enable the Skywarn playlist.
Importing Skywarn Frequencies (iSCAN)
1.
Browse for Skywarn frequencies in the iSCAN
library and import them to the Skywarn playlist.
2.
Enable the Skywarn playlist.
Playlist 098
Playlist 098
Playlist 098
Playlist Skywarn
2000018.UG.031011.indd 37
3/10/2011 11:07:02 AM
