18
18
Se
ar
ch
Search Settings
To change search settings, press
MENU
while searching.
Saving Found CTCSS or DCS Codes
When importing objects from the Library, CTCSS and DCS code information
from the RadioReference database is automatically imported with the
conventional channel information. In cases where the squelch code (CTCSS
or DCS subaudible) for a conventional radio channel is not included in the
RadioReference database, your iSCAN can quickly identify the code, if one
is present.
When a conventional channel includes a CTCSS or DCS code, the code
appears on the bottom line of the display, followed by an “S”, which
indicates a valid CTCSS or DCS code:
CTCSS 127.3 S
All
Attenuator
Limits iSCAN’s effective range, which may help reduce
interference from strong local transmitters.
Zeromatic
Helps iSCAN tune to exact frequencies when searching.
Delay
How long iSCAN waits after a transmission before resuming.
Signal
Stalker II
Special Mode
Signal Stalker II skips any 1 MHz block where you have
skipped five or more frequencies. Special Mode is useful
when you are close to many high power transmitters that
are close together in frequency.
Limit
Sear
ch
Lo
Sets the lowest frequency for the search range.
Hi
Sets the upper frequency for the search range.
Signal Stalker II &
Service
Frequency
Ranges
Disabling some frequency ranges speeds up the search.
Service
Rx Mode
Set the RX modulation mode to automatic, or forces AM
mode or FM mode. RX Mode functions in Aircraft and
Amateur bands, Press
or
to change.
2000018.UG.031011.indd 18
3/10/2011 11:06:58 AM
