7
4. Route the adapter’s cord through
the strain relief slot on top of the
base.
5. Plug the adapter into a standard
AC outlet.
6. Fully extend the base’s antenna
and place it in a vertical position.
Mounting the Base on a Wall
Plate
1. Plug one end of the supplied mod-
ular cord into the
TEL. LINE
jack
on the back of the base.
2. Route the modular cord through
the groove on the bottom of the
base.
3. Plug the cord’s other end into a
modular phone line jack.
4. Insert the supplied AC adapter’s
barrel plug into the
DC IN 9V
jack
on the back of the base.
5. Route the adapter’s cord through
the strain relief slot on top of the
base and through the groove on
the bottom of the base.
6. Plug the adapter into a standard
AC outlet.
43-1047.fm Page 7 Tuesday, August 17, 1999 11:37 AM
