Radio Shack ET-1123, Руководство пользователя

Страница: 15 / 28

15
2. Dial the service's main number.
3. When the service answers, press
TONE
/ . Any additional numbers
you dial are sent as tone signals.
4. When you hang up, the phone auto-
matically resets to pulse dialing.
USING PAGE/INTERCOM
You can use the phone as a two-way
pager and intercom between the base
and the handset. This is useful if the
handset is away from the base and you
want to locate it, or if you want to have a
conversation between someone with the
handset and someone at the base.
To page the base from the handset
,
press
INTCM
. The base and handset
ring. Paging appears on the base's
display and Paging Base appears on
the handset's display. Press
SPEAKER
or
INTERCOM
on the base to answer the
page. Both displays change to Inter-
com .
To page the handset from the base
,
press
INTERCOM
. The handset and
base ring. Paging Handset appears
on the base's display and Paging ap-
pears on the handset's display. Press
TALK
or
INTCM
on the handset to an-
swer the page. Both displays change to
Intercom.
In either case, if the called party does
not answer within 1 minute, the paging
stops. Press
INTCM
or
INTERCOM
again
to restart paging.
To end an intercom call, press
TALK
on
the handset, press
SPEAKER
on the
base, or hang up the handset.
If a call comes in during an intercom
conversation, only the base rings, but
the person at the handset can also hear
the ring through the intercom. Either per-
son can answer the call by pressing
TALK
or
SPEAKER
once to end the inter-
com call, then pressing
TALK
or
SPEAK-
ER
again to answer the call.
Note: The intercom does not operate if
the party being paged is already on a
call.
TRANSFERRING A CALL
BETWEEN THE HANDSET
AND THE BASE
You can use the phone's intercom fea-
ture to transfer a call between the hand-
set and the base for a three-way
conversation.
To transfer a call from the handset to the
base, press
INTCM
. The call is placed on
hold, CHARGE/IN USE blinks, and
Hold and Paging Base appear on
the handset's display. When the person
at the base answers, press
TALK
. The
call is released from hold and trans-
ferred to the base. To bring the handset
back into the conversation for a three-
way conference, press
TALK
again.
43-1123.fm Page 15 Tuesday, September 5, 2000 11:13 AM