17
Operation
• To replace an existing frequency
with a new one, tune to the
desired frequency then hold
down the number key corre-
sponding to that memory location
for about two seconds while
FULL
appears. (Be sure you
also set the correct memory
page).
• To rearrange manually stored
FM frequencies in memory loca-
tions 1–9, press
MODE 5 0
.
The receiver orders the frequen-
cies from the highest to the low-
est.
Note:
Frequencies stored in the
AM or LW bands cannot be
rearranged using
MODE
.
Recalling a Station
in Memory
Repeatedly press
BAND
until the de-
sired band appears.
Use the number keys to enter the
memory location for the desired sta-
tion. The receiver instantly tunes to
the station and displays its frequency
and memory location number.
Note:
The active memory location
number appears in a frame.
Deleting a Station
from Memory
1. Repeatedly press
BAND
until the
desired band appears.
2. Use the number keys to enter the
memory location number you
want to delete.
3. Press
M
.
M1
and the memory
location number flash.
4. Press
C/M
.
DEL
and the memory
location number disappear.
Memory Scan
You can quickly scan the preset
memory locations. Repeatedly press
BAND
until the desired band appears.
Press
M.SCAN
. The receiver scans
each preset memory in turn, pauses
for about 7 seconds on each memory
location, and continues to scan for the
next memory location. When you
reach the desired memory location,
press any button to stop memory
scan.
Exchanging Station Posi-
tions in Memory
Follow these steps to move a station
from one location to another.
1. Repeatedly press
BAND
until the
desired band appears.
2. Recall the location number of the
station you want to move (see
“Recalling a Station in Memory”).
20-230.fm Page 17 Friday, March 24, 2000 9:07 AM