11
Preparation
USING THE CLOCK
Your receiver has dual clocks. We
recommend you set the primary clock
for local time and the secondary clock
for UTC (Coordinated Universal Time,
formerly called Greenwich Mean
time), because most shortwave sta-
tions announce broadcast times in
UTC 24-hour format.
To switch back and forth between
times, press
CLOCK 1/2
then
.
Setting the CLOCK1 Time
1. If the receiver is on, press
DIS-
PLAY
.
appears and the
CLOCK 1 time displays. Hold
down
for about 2 seconds
until
flashes and
–:– –
appears.
If the receiver is off, hold down
for about 2 seconds until
flashes and
–:– –
appears.
2. While
flashes, enter the time
using the number keys.
Notes:
• The clock default is a 12-hour
format. If you enter an invalid
time, such as 13:00 or 11:69, the
receiver
beeps
and
Err
appears, prompting you to enter
the correct time.
• To change the 12-hour format to
a 24-hour format, see “Using
Mode” on Page 20.
3. To set AM or PM, press
M
.
4. Press
to store the setting.
The CLOCK 1 time displays.
Setting the CLOCK 2 Time
You can set CLOCK 2 to store a dif-
ferent time than CLOCK 1.
1. If the receiver is on, press
DIS-
PLAY
so
appears and the
CLOCK1 time displays. Then
press
CLOCK 1/2
.
If the receiver is off and while
and the CLOCK1 time display,
press
CLOCK 1/2
.
2.
flashes for about 7 seconds
and the CLOCK 2 time displays.
While
flashes, press
.
stops flashing.
3. Hold down
for about 2 sec-
onds until
flashes and
–:– –
appears.
4. While
flashes, enter the time
using the number keys.
5. To set AM or PM, press
M
.
6. Press
to store the setting.
The CLOCK 2 time appears.
Note:
To constantly display the
CLOCK 2 time, press
CLOCK 1/2
then
.
and the time appear. To re-
turn to CLOCK 1, press
CLOCK 1/2
then
.
and the time appear.
20-230.fm Page 11 Friday, March 24, 2000 9:07 AM