23
Answering System
Adjusting the Volume
Press
VOLUME
to increase the volume and
to decrease
the volume of the system speaker. The system beeps each time
you press
VOLUME
or
so you can hear the selected level.
Setting the Day and Time
You must set the day and time so the system records the cor-
rect day and time of each incoming message and memo.
Notes:
• When you press
/TIME CHECK/REPEAT
, the system
announces “Please set time” until you set the day and time.
• The day/time voice stamp automatically defaults to Mon-
day, 12:00 AM, when you connect the system to power.
The clock will not run if you do not set it after you turn on
the system.
• If you do not press a button for more than 8 seconds
between steps, the system exits the setup mode. Start over
at Step 1.
1. Press
ON/OFF/STOP
to turn on the system.
2. Press
/TIME SET/SKIP
. The system announces “Mon-
day.” Repeatedly press
/TIME SET/SKIP
until you hear
the correct day.
3. Press
/TIME CHECK/REPEAT
. The system announces
“Twelve.” Repeatedly press
/TIME SET/SKIP
until you
hear the correct hour.
43-3804.fm Page 23 Thursday, July 6, 2000 2:35 PM
