15
Operation
plays. Then press
TALK
and the phone dials
the number.
To dial the last number dialed using the
base, press
SPEAKER
then
REDIAL
.
Notes:
• The redial memory for each keypad is
separate. You cannot redial a number
you dialed on the handset’s keypad
using
REDIAL
on the base’s keypad, and
vice versa.
• On the handset, you can also press
RDL/PAUSE
after pressing
TALK
to dial
the last number dialed.
• The redial memory holds up to 32 digits,
so you can redial long-distance as well
as local numbers.
• The redial memory also holds pause
entries. See “Entering a Pause” on
Page 18.
USING FLASH
FLASH
performs the electronic equivalent of
a switchhook operation for special services,
such as Call Waiting.
For example, if you have Call Waiting, press
FLASH
to answer an incoming call without
disconnecting the current call. Press
FLASH
again to return to the first call.
Note: If you do not have any special phone
services, pressing
FLASH
might disconnect
the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these special
tone services by following these steps.
1. Be sure
DIAL
MODE
is set to
P
.
2. Dial the service’s main number.
3. When the service answers, press
*
/
TONE/
6
6
6
6
on the handset (
TONE
on the
base). Any additional numbers you dial
are sent as tone signals.
When you hang up, the phone automatically
resets to pulse dialing.
USING PAGE/INTERCOM
You can use the phone as a two-way pager
and intercom between the base and the
handset. This is useful if the handset is away
from the base and you want to locate it, or if
you want to converse with someone through
the intercom.
To page the base from the handset, press
IN-
TCM
.
Paging
Base
appears, and the base
and handset ring. Press
SPEAKER
or
INTCM/
PAGE
on the base to answer the page.
In-
tercom
appears.
To page the handset from the base, press
IN-
TCM/PAGE
. The handset and base ring, and
Paging
appears. Press
TALK
or
INTCM
on
the handset to answer the page.
Intercom
appears.
To end an intercom call, press
TALK
on the
handset, press
SPEAKER
on the base, or
hang up the handset.
If a call comes in during an intercom conver-
sation, either the person at the base or the
person at the handset can answer the call.
Press
TALK
on the handset or
SPEAKER
on
the base once to end the intercom call, then
press
TALK
or
SPEAKER
again to answer the
incoming call.
Note: You can use the intercom while a call
is on hold, but not during a conversation.
43-5520.fm Page 15 Friday, July 21, 2000 8:01 AM
