Need help? Call 1-800-763-9232
49
TROUBLESHOOTING
Problem
Solution
Display begins to fade,
does not appear, or the
red light blinks five times
when you press a key.
Replace the batteries with four
fresh AAA alkaline batteries.
The 7-in-One does not
operate your device.
Try all of the codes listed for
your brand of device in the
“Setup Codes” section. If this
does not work, try searching for
your code (see “Searching for a
Code” on Page 37).
Make sure the device you are
setting up can be operated with
an infrared remote.
The 7-in-One is not per-
forming commands prop-
erly.
Try all of the codes listed for
your brand of device in the
“Setup Codes” section. Many
set-up codes may allow some
degree of operation. However,
only one set-up code will work
correctly with your device.
You make a mistake
when setting up your 7-in-
One.
During any set up procedure,
except for timed sequences, the
ESC key will return you to the
DEVICE and the TIME screen
without saving any of the
entered information. If you make
a mistake when setting up a
timed sequence, return to the
timed sequence menu and
delete the incorrect sequence.
VCR not recording.
As a safety feature on the 7-in-
One, you must press the REC
key twice to begin recording.
CH+/– (Channel Up/
Down) and LAST not
working for your RCA TV.
Due to RCA design (1983-
1987), only the original remote
will operate these functions.
15-1935.fm Page 49 Thursday, December 31, 1998 11:37 AM
