3
1
Set up the Sensor
Install a Battery
1.
Insert one AA battery
(not included), matching
the polarity symbols (
+
and
–
) marked inside the
compartment.
2.
First slide
Channel
1 2 3
to choose a
channel. Then use a
pointed object to press
RESET
. If you are using
more than one sensor,
choose a different channel for each sensor.
n
Notes:
• When the low battery icon
appears in
Outdoor
Temperature Display
,
replace the battery.
•
Use alkaline batteries for
longer usage, or use consumer
grade lithium batteries in
temperatures below –4˚F (–20˚C).
Mount the Sensor on an Outdoor Wall
Place the sensor outdoors not more than 98 feet (30 meters)
from the forecaster. Position the sensor facing the forecaster
with few obstructions. Make sure the sensor is out of direct
Channel
1 2 3
RESET
AA
