11
Preparation
Remote Sensor
To set the remote sensor on a flat surface, insert the
ends of the supplied wire stand into the holes on the
back of the remote sensor above the battery compart-
ment.
To mount the remote sensor on a wall (or on a post
outdoors, for example), you need two
1
/
8
inch (3-mm)
screws (not supplied) with heads that fit the keyhole
slots on the back of the supplied mounting bracket.
1. Drill two holes 1
3
/
4
inches apart. Then
thread a screw into
each hole, letting the
heads extend about
1
/
4
inch from the mounting
surface.
2. Align the keyhole slots
on the mounting bracket
with the screws and
slide the bracket down-
ward to secure it.
3. Slide the remote sensor into the mounting
bracket.
