10
Preparation
Cautions:
• Do not place the main unit or remote sensor in
direct sunlight, near electrical appliances, or near
heating or air conditioning vents.
• Do not place the main unit in a location where it
is likely to get wet. Only the remote sensor is
weather-resistant.
Main Unit
To set the main unit on a flat surface, rotate the table
stand on the bottom of the unit clockwise until it
clicks.
To mount the main unit on a wall, you need a
1
/
8
-inch
(3-mm) screw (not supplied) with a head that fits the
keyhole slot on the back of the main unit.
1. Drill a hole in the wall at the desired mounting
location.
2. Thread a screw into the wall until the head
extends about
1
/
4
inch from the wall.
3. Position the keyhole slot in the back of the main
unit over the screw and slide the thermometer
down to secure it.
