9
Features
1. Use a Phillips screwdriver to remove
the screws in the battery compart-
ment cover, then lift off the cover.
2. Set
CHANNEL
and
°C/°F
inside the
compartment to the desired set-
tings. (See “Setting/Selecting the
Display Channel” on Page 18 and
“Changing the Degree Format” on
Page 21.)
3. Place the batteries in the compart-
ment as indicated by the polarity
symbols (+ and –) marked inside.
4. Use a pointed object (such as a
straightened paper clip) to press
RESET
and initialize the sensor’s
transmitter.
5. Replace the cover and reinsert and
tighten the screws.
