11
Features
3. Replace the cover.
4. Place the main unit next to the
remote unit. Then use a pointed
object (such as a straightened paper
clip) to press
RESET
on the back of
the unit and initialize the main unit’s
receiver.
When
appears below a
CHANNEL
in-
dicator on the main unit’s display, replace
the batteries in the remote sensor for that
channel. If it is indoor display, replace the
batteries in the main unit.
MOUNTING THE SYSTEM
You can place the main unit and remote
sensor on flat surfaces (such as a table
or counter top), or mount either on a wall
using the supplied bracket (for the remote
sensor) and screws (not supplied).
