20
Operation
USING THE INDOOR
TEMPERATURE WINDOW
The weather station samples the indoor air
temperature about every 38 seconds. The
monitor shows both the current indoor tem-
perature and the dew point temperature in the
indoor temperature window (on the monitor).
You can display the temperature in degrees
Celsius (°C) or degrees Fahrenheit (°F).
Press
TEMP
. Then repeatedly press
UNIT
until
&
&
&
&
or
)
)
)
)
appears.
Notes:
• The monitor adjusts the unit of measure-
ment (Celsius or Fahrenheit) you see for
both the outdoor and indoor temperature
readings simultaneously.
• You can also view the indoor tempera-
ture from the thermo/hygro/baro sensor.
Viewing/Resetting MAX/MIN
Temperature Records
To toggle between the current indoor tem-
perature view and the maximum or minimum
indoor temperature view (recorded since the
last memory reset), press
TEMP
, then
repeatedly press
MEMORY
.
0$;
0$;
0$;
0$;
or
0,1
0,1
0,1
0,1
appears when the monitor shows
the maximum or minimum recorded tempera-
ture. The recorded times of the maximum or
minimum temperatures and
67$03
67$03
67$03
67$03
appear in
the
CLOCK
window.
To reset the temperature records in memory
and record a new maximum or minimum
temperature (beginning with the current
reading), hold down
MEMORY
for about 2
seconds.
Using the HI/LOW Temperature
Alarms
You can set the monitor to sound an alarm
when a set high or low indoor temperature is
reached.
Each time the temperature changes and
meets or exceeds a set high or low indoor
alarm condition, the current temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
flash, and the monitor sounds an
alarm for about 1 minute. To silence the
alarm sooner, press any key.
Note: If you press a key to silence the alarm,
the alarm stops sounding, but the current
temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
continue to flash
until that alarm condition is no longer met.
To view the current temperature and the cur-
rent high or low indoor temperature alarm
conditions, press
TEMP
, then repeatedly
press
ALARM
.
+,
+,
+,
+,
or
/2
/2
/2
/2
appears when the
monitor shows the high or low indoor temper-
ature alarm conditions.
Setting a HI/LOW Temperature
Alarm
1. Press
TEMP
.
2. Repeatedly press
ALARM
so
+,
+,
+,
+,
or
/2
/2
/2
/2
appears.
3. Hold down
SET
until the last tempera-
ture alarm condition flashes.
4. Repeatedly press (or hold down)
or
to set the temperature alarm.
5. Press
SET
to store the setting.
Note: The monitor automatically displays the
high temperature alarm setting after you set
the low alarm temperature, and vice versa.
