background image

The Integ

rated Answer

ing D

evice

27

3. When you have finished, press 

 (

PLAY/

STOP

), 

MEMO REC

 or 

SET

 to stop recording. 

You hear a confirmation tone and the system 
returns to standby.

Recording a conversation

You can record up to ten minutes of conversation 
while you are using your phone. Any conversation 
that lasts less than two seconds will not be 
recorded.

 

Ô

 

!

 

1. During a conversation from the handset, press 

and hold 

MEMO REC

. The unit begins recording 

and [ ] flashes on the message counter. 

A beep that can be heard by both parties 
sounds during recording.

2. To stop recording, press 

 (

PLAY/STOP

) or 

MEMO REC

. You hear a confirmation tone.

R

EMOTE

 O

PERATION

Remote access away from home

You can operate your answering system from a 
remote location using any touch-tone telephone. 
Use this function to check for recorded messages to 
play or delete message. When using any touch-
tone telephone, you can even record a new greeting 
message.

1. Call your telephone number.

2. During the greeting message, press 

0

 and 

enter your PIN code. (See “Setting a Personal 
Security Code (PIN)” on page 18.)

3. The answering system announces the current 

time and the number of message stored in 
memory. Then you hear “To play incoming 
messages, press 

02

. For help, press 

10

”.

Ô

 NOTES 

Ô

 

• A recorded conversation 

is treated as a incoming 
message and will be 
added to the stored 
messages.

• When recording a 

conversation, all dialing 
features except for using 
call waiting operation 
(See “Flash and Call 
Waiting” on page 12.) 
are disabled. Stop 
recording if you need to 
enable any other 
handset keys.

• If you receive a call 

waiting tone while 
recording a conversation, 
press 

TALK/FLASH 

to 

accept the waiting call. 
The recording feature 
continues recording the 
new call. The original call 
is put on hold.

!

 IMPORTANT 

!

Every state has different 
regulations governing the 
recording of conversations 
over the telephone. Be sure 
to check your local, state 
and federal laws before 
using this product to record 
any telephone conversation 
in order to determine that 
your use is in compliance 
with such laws or 
guidelines.

43-3856.FM  Page 27  Saturday, February 28, 2004  6:45 PM

Содержание 43-3856





































Отзывы: