7
Wall Installation
Setting the Handset Retainer for Wall Mounting
1.Remove the handset retainer on the base by sliding it upward.
2.Flip the retainer over so the tab is facing up.
3.Slide the retainer back onto the base.
Mounting on a Standard Wall Plate
The phone is designed to be mounted on a standard AT&T or GTE wall plate.
1.Plug the AC adapter into the base.
2.Place the AC adapter cord inside the left molded channel cord holder.
3.Plug a short telephone cord into the TEL LINE jack on the base.
4.Place the telephone cord into the right molded channel cord holder and
plug the other end of the cord into the wall jack. (Remember, the phone
must be fully charged before you can use it.)
5.Place the base on the two posts of the wall plate and slide downward to
secure.
6.Plug the AC adapter into a standard 120V AC wall outlet that is not
controlled by a wall switch.
7.Raise the antenna on the base to get best communication range.
