background image

7

Care

ˆ

Care

Keep the mixer dry; if it gets wet, wipe it dry
immediately. Use and store the mixer only in
normal temperature environments. Handle
the mixer carefully; do not drop it. Keep the
mixer away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it
looking new.

Modifying or tampering with the mixer’s inter-
nal components can cause a malfunction
and might invalidate its warranty. If your mix-
er is not performing as it should, take it to
your local RadioShack store for assistance.

ˆ

Specifications 

Input Sensitivity: 

Mic ........................................................................................................................................................  1 mV

Line ...................................................................................................................................................  100 mV

Output Level at 1 Kohm Load ...............................................................................................................  1 mV

Input Overload: 

Mic ................................................................................................................................... More than 250 mV

Line .......................................................................................................................................... More than 6V

Distortion .............................................................................................................................  Less than 0.5%

Signal-to-Noise Ratio  .......................................................................................................  Better than 55 dB

Frequency Response  .................................................................................................  20–20,000 Hz ± 2 dB

Power Requirements: 

DC ........................................................................................................................................ One 9V Battery

AC (Using AC Adapter)  ......................................................................................................  120V AC, 60 Hz

Dimensions (HWD) ............................................................................................  2

3

/

16

 × 10

5

/

8

 × 6

5

/

16

 Inches

(5.5 × 27.0 × 16.0 cm)

Weight ........................................................................................................................................  2 lbs 4.3 oz

(930 g)

Specifications are typical; individual units might vary. Specifications are subject to change and improve-
ment without notice. 

Содержание 4-Channel Stereo Microphone Mixer









Отзывы: