11
Se
tu
p
To monitor the mixer output on a second set of speakers, connect one end of
an audio patch cord (not supplied) to the mixer’s
BOOTH OUTPUT L
(white)
and
R
(red) jacks. Then connect the other end to your secondary amplifier’s L
and R input jacks, matching L to L and R to R.
Connecting Inputs
You can connect up to eight audio input sources (such as a tuner, cassette
deck, CD player, or VCR) to the input jacks on the back of the mixer.
w
Caution:
Do not connect an audio source with a line-level to the low-level
PHONO 1
or
PHONO 2
audio input jacks.
1.
Connect the line-level outputs from up to seven audio sources to the
LINE
(1–7)
input jacks, matching left to left, and right to right.
n
Note:
PHONO 1
and
LINE 1
(as well as
PHONO 2
and
LINE 3
) use the
same jack. When connecting the line-level output audio sources, slide
INPUT
SELECT
to
LINE 1
and
LINE 3
.
2.
Connect the low-level outputs from up to two audio sources (such as
turntables) to the
PHONO 1
and
PHONO 2
input jacks.
n
Note:
•
If you connect magnetic-cartridge turntables, connect their ground wires
(usually black or green) to
GROUND
.
•
To use
PHONO 1
and
PHONO 2
input jacks, slide
INPUT SELECT
to
PHONO 1
and
PHONO 2
.
BOOTH OUTPUT L/R
PHONO 1 and
PHONO 2
GROUND
