8
Preparation
print a copy directly from your hard drive to
your printer. To read the guide, click Start,
Programs, Presto! PageManager, then
PageManager User’s Manual.
You do not need to turn off the computer be-
fore connecting or disconnecting your scan-
ner.
1. Turn on your computer and start the
installed Windows operating system
(Windows 2000, Windows ME, or Win-
dows 98 or later).
2. Insert the PageManager software CD
into your CD-ROM drive. The CD starts
automatically.
Note: If the PageManager CD does not
start automatically, make sure the CD-
ROM's door is completely shut. If the CD
still does not start, the auto run option on
your computer might be turned off. If this
happens, click
My Computer. The win-
dow shows the available drives on your
computer. Then double-click the icon for
your CD-ROM drive and double-click
setup.exe
. The CD starts.
3. Plug the flat end of the supplied USB
cable into your computer’s USB port.
Notes:
• The supplied cable fits only one way.
If it does not insert easily, do not force
it.
• Refer to your computer’s owner’s
manual for the location of the USB
port.
• Some new computers also have a
keyboard with a built-in USB port. You
can plug the scanner’s cable into the
keyboard instead of the computer.
4. Plug the other end of the supplied USB
cable into
USB
on the back of the scan-
ner.
5. After you finish installing the software,
restart your computer.
Note: Once the scanner is working, you
can install the other applications pro-
vided with the CD.
VERIFYING CONNECTION
After you successfully install the scanner,
appears in the bottom right corner of the
Windows taskbar. The indicator on top of the
scanner turns orange when the scanner and
computer communicate.
If
appears instead, the scanner is not
properly connected. See “Troubleshooting”
on Page 14 for more information.
Follow these steps to confirm that the scan-
ner has been successfully connected.
1. Right-click
on the Windows task-
bar. The shortcut menu appears.
2. Click Scan Buttons Setting. A dialog
box appears, confirming your scanner’s
settings.
3. Click Exit to close the dialog box. Your
scanner is ready to scan.
