5
CONNECTING TO A
VEHICLE’S CIGARETTE-
LIGHTER SOCKET
Plug the DC cord into your vehicle’s cig-
arette-lighter socket.
Note: If the charger does not operate
when it is connected to the cigarette-
lighter socket, remove the DC adapter
from the cigarette-lighter socket and
check the socket for debris. Also check
the fuse in the adapter and your vehi-
cle’s fuse block.
CHARGING BATTERY
PACKS
1. To charge a 6V battery pack, simply
insert it into the compartment on the
charger, then skip to Step 3.
To charge a 7.2V or 9.6V battery
pack, slide its connector into the
CHARGING JACK
socket. If the con-
nector does not fit, turn it over and
try again. Do not force it.
To charge a 4.8V battery pack, plug
the small end of the supplied
adapter cord fully into the battery
pack’s connector. Then plug the
adapter cord’s large end fully into
the
CHARGING JACK
socket.
ILLUSTRATION
of DC cord
connection
ILLUSTRATION
of 6V battery
connection
ILLUSTRATION
of 7.2 V battery pack
connection
23-411.fm Page 5 Friday, August 6, 1999 3:00 PM
