O
WNER
’
S
M
ANUAL
Using Channel Scan
7
VCR
Code:
Brand Name:_______________________
S
EARCHING
F
OR
Y
OUR
C
ODE
If your device does not respond to the remote
control after trying all codes listed for your brand,
or if your brand is not listed at all, try searching for
your code:
NOTE:
Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media.
1.
Press and hold
SETUP
until you hear the
programming menu, then press
1.
NOTE:
If more than 15 seconds pass between key
presses, the remote says “Goodbye” and exits
programming.
2.
Press
2
.
3.
At the prompt, press a device key (i.e.,
CBL/
SAT
,
AUX
,
TV
,
DVD
,
AUDIO
, or
VCR
).
4.
At the prompt, press a test key, such as
POWER
.
NOTE:
If your device or its original remote control
does not have a Power key, select a different test
function in this step (e.g.,
VOL+
,
Play
, etc.).
5.
At the prompt, aim the remote control at the
device (e.g., TV) and press
CH+
one or more
times to try each code. Stop when a code
performs the test function selected in step 4. If
desired, use
CH-
to try a previous code.
NOTE:
In the search mode, the remote control will
send IR codes from its library to the selected device,
starting with the most popular code first.
6.
To lock in the code, press
SETUP
once.The LED
blinks twice and the remote plays “Success”
and returns to the Device Programming
options.
7.
Repeat steps 2 through 6 to program another
device or press and hold
SETUP
to exit
programming.
NOTE:
Use the appropriate device key and test
function key for the device you are searching for.
C
HECKING
T
HE
C
ODES
If you have set up the remote control using the
Searching For Your Code
procedure (on page 7), you
may need to find out which four-digit code is
operating your equipment. To do so:
1.
Press and hold
SETUP
until you hear the
programming menu, then press
1.
2.
Press
3
.
3.
At the prompt, press a device key (i.e.,
CBL/
SAT
,
AUX
,
TV
,
DVD
,
AUDIO
, or
VCR
). The remote
will state the code.
4.
Write down the code digits in the appropriate
code boxes on page 6.
5.
Repeat steps 2 through 3 to hear another
device’s code or press and hold
SETUP
to exit
programming.
NOTE:
Use the appropriate device key for the device
you are noting.
USING CHANNEL SCAN
In the
VCR
,
DVD
,
CBL/SAT
, or
TV
mode, use the
FAV
SCAN
key to start a 3-second scan of all channels. If
programmed, use the
FAV SCAN
key to scan only
your favorite channels (see “Programming Favorite
Channel Scan” on page 7).
1.
Press
VCR
,
DVD
,
CBL/SAT
, or
TV
to select that
device.
2.
Press
FAV SCAN
once.The LED will blink as
each channel is changed.
•
If
Favorite Channel Scan
has been set up,
scanning of favorite channels will start
and cycle through stored channels for
3 minutes or until stopped by pressing
any key.
•
If
Favorite Channel Scan
has not been set
up, scanning will start with the current
channel, then proceed to the next channel
up and cycle through all channels for 3
minutes or until stopped by pressing any
key.
3.
To stop scanning channels at any time, press
any key once.
P
ROGRAMMING
F
AVORITE
C
HANNEL
S
CAN
In the
VCR
,
DVD
,
CBL/SAT
, or
TV
mode, you can store
a list of up to 10 favorite channels, in any order, that
will be immediately scanned when you press
FAV
Scan
(see “Using Channel Scan” on page 7).
NOTE:
You can only program Favorite Channels for
one mode. After programming, if you press
FAV Scan
while in another mode, the remote control will start a
normal channel scan instead (if applicable to the
selected device).
1.
Press and hold
SETUP
until you hear the
programming menu, then press
2.
NOTE:
If more than 15 seconds pass between key
presses, the remote says “Goodbye” and exits
programming.
2.
At the prompt, select a
Favorite Channel Mode
by pressing
VCR
,
DVD
,
CBL/SAT
, or
TV
.
3.
At the prompt, use the
Number Keys
to enter a
favorite channel number (e.g.,
0 1 2
),
including
+100
or
Enter
, if your device
requires this.
RS 6in1 Easy Setup Owners Manual.fm Page 7 Wednesday, December 15, 2004 10:31 AM
