18
• To reset the Weatheradio to receive all SAME
signals within a 50-mile radius, simply enter
the code 99 in the first memory position. See
“Using the Weatheradio’s ‘All Signals’ Code”
on Page 19.
• For easy reference, write down each FIPS
code you store in memory on the label located
beneath the Weatheradio’s keypad cover.
8. Press
YES
to store the code in the Weatheradio’s
memory.
If you set
SINGLE/MULTIPLE
to
MULTIPLE
, the
code (if any) stored in the next memory position
appears on the display. Repeat Steps 4–6 for
each code (up to 15) you want to change or add.
When you press
YES
to store a code in the last
(15th) memory position, the code you stored in
the first position reappears.
If you set
SINGLE/MULTIPLE
to
SINGLE
, the dis-
play does not change.
9. When you finish, set
PROGRAM/OPERATE
to
OPERATE
. The current alert status appears (see
“Using the Alert Function” on Page 24).
12-249.fm Page 18 Tuesday, July 6, 1999 4:00 PM