24
25
B
A
C
B
D
C
Removing the Battery
Note: The battery should only be removed when the bike is stationary and powered off.
Failure to do so could result in damage to the battery or electrical system of the bike.
A. Insert the provided key into the battery lock. If you own multiple Flyer™ bikes, please
ensure the 4-digit codes on the key and lock are matching.
B. Turn the key clockwise to release the battery latch.
C. Remove the battery by sliding it vertically until it disengages from the dock rail.
D. Slide the battery outward between the rear frame as shown in the image below.
Installing the Battery
A. Slide the battery between the rear frame as shown in the image below.
B. Align the battery pack with the dock rail ensuring both sides are properly engaged.
C. Slide the battery downward along the dock rail. Push firmly until you hear an audible
click indicating the battery is fully installed.
Install Bluetooth Tag (optional)
The bike includes a holder that can house one Bluetooth location tag as a security
feature. The tag must be purchased separately and activated prior to installation.
For a list of compatible tags, visit
flyer.radioflyer.com
or contact
customerservice@
radioflyer.com
You can access the Bluetooth tag holder by removing the battery and locating the tag
pocket on the dock. Push down on the tag device until you hear a click. Some Bluetooth
tags require an adhesive tape to fit securely in the pocket.
