Radio Bridge RBM101H-345, Руководство пользователя

Страница: 15 / 20

R
ADIO
B
RIDGE
RBM101
I
U
SER
G
UIDE
C
OPYRIGHT
© 2017, R
ADIO
B
RIDGE
I
NC
. R
ADIO
B
RIDGE
RBM101
I
U
SER
G
UIDE
P
AGE
14
OF
19
4.2. Status Messages
This section defines status messages that are sent from the module back to the host over the
serial port.
The status message begins with the ASCII characters “STA “ an as defined in the Serial
Commands section. These error codes are defined in the following table.
Table 11 Status Messages
Code Status Description
0000 Device reset Device just came out of reset
4.3. Error Messages
This section defines the error messages that are sent from the module back to the host over
the serial port. The message begins with the ASCII characters “ERR” as defined in the Serial
Commands section. This error codes are defined in the following table:
Table 12 Error Messages
Code Error Description
0003 Not Ready for new
commands The host is attempting to send new commands but the
device is not ready to receive new commands yet.
0004 Incorrect command
format The format of the serial command sent to the device is
wrong.
0009 Not ASCII coded
hex The values provided were not ASCII coded hex values.
000a Command not
recognized A command was sent to the device that was not
recognized
0012 Invalid parameter The parameter used in the AT command is invalid
0017 Radio init failed Initialization of the radio failed
0018 Radio receive
overflow Radio receiver overflow condition, radio is reset
Note that status messages do not include errors. Error messages are defined
in the section
Error Messages .