RADICAL R-C10SK1, Руководство по установке

Страница: 8 / 9

INSTALLATION:
6. Connect the main harness (No. 11) of the Radical device
(No. 1) to the Plug connector of the car and close its
locking mechanism. After that connect the CAN bus
interface (No. 12) to the main harness. Connect all the
cables to the Radical device (No. 1) those previously lay
in the radio slot, and the original antenna cables.
7. Neatly arrange the wires to the side, making room for the
Radical device. Carefully slide it into the radio slot. Push
back the R-C10SK1 until you hear the clicking sound of
the latching mechanism.
The installation of your R-C10SK1 is now complete.
4. Install the GPS antenna (No. 2) in a suitable
position, making sure that the GPS reception is not
adversely affected by unwanted shielding of metallic
vehicle parts (thermal insulation glazing, etc.). Then
route the connection cable into the radio bay.
5. Route the USB extension cable´s (No. 5, 6) from the
radio bay to your preferred position.