2.1. Safety Information
Warning
To reduce the risk of fire, electric shock, or injury to persons, please follow the instructions below:
• Use this device only in the manner intended by the manufacturer.
• No modification of this device is allowed.
• This device is not intended for use by persons (including children) with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the device by a person responsible for their safety.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
• Before use, ensure correct mains AC voltage.
• Do not operate the device with a damaged power cord or plug.
• Do not attempt to alter or modify the power cord or plug.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do
not route cord under furniture or appliances. Arrange cord away from trafficked areas to ensure it will
not be tripped over.
• Do not position the device in a way that makes it difficult to disconnect the plug from the wall socket.
• Prior to cleaning or other maintenance, the appliance must be switched off and disconnected from the
supply mains.
• Wear personal protective equipment (PPE) such as a disposable face mask and gloves when
handling serviceable parts.
• Do not obstruct the device’s airflow intakes or outlets.
• Remove batteries from the remote control if not in use for an extended period.
• For products containing batteries, ensure the user does not make contact with the battery case and
patient simultaneously.
• Do not use the fan in this device with any solid-state speed control device.
• This device contains a UV-C emitter. Do not stare at the light source.
◦ Unintended use of the device or damage to the housing may result in the escape of dangerous
UV-C radiation. UV-C radiation may, even in small doses, cause harm to the eyes and skin.
◦ Devices that are obviously damaged must not be operated.
◦ Do not attempt to replace the UV-C emitter. This must be performed by a trained technician.
Please contact your local Radic8 distributor to perform maintenance.
• Skin or eye damage may result from directly viewing the light produced by the lamp in this apparatus.
Always disconnect power before servicing.
• Do not immerse any part of the device in liquid or allow liquid or spray aerosols to enter the device.
• In the event of smoke, unusual odors, or strange noises, switch off the device immediately and
disconnect from power. Contact your local Radic8 distributor for support.
Read and save these user servicing instructions.
*
Radic8
VK Pro - 1_en
Copyright © 2022 Radic8
Page 5 of 45
Содержание VK Pro
Страница 1: ......
Страница 20: ...Radic8 VK Pro 1_en Copyright 2022 Radic8 Page 20 of 45...
Страница 27: ...Internal External Radic8 VK Pro 1_en Copyright 2022 Radic8 Page 27 of 45...