Ref No.
：
082012
Trouble shooting:
Error Message
Problem
Solution
Error 5~9, the system is not functioning properly.
Unload the battery, wait for 1 minute and repower it. If the message
reappears, contact the retailer for service.
Measurement before device stabilization.
Wait until all the icons stops flashing.
The device showing a rapid ambient temperature change.
The ambient temperature is not within the range between 10
o
C and 40
o
C (50
o
F
~104
o
F).
Allow the thermometer to rest in a room for at least 30 minutes at room
temperature: 10
o
C and 40
o
C (50
o
F ~104
o
F).
(1)
In ear/forehead mode: Temperature taken is higher than +42.2
o
C (108°F)
(2)
In surface mode: Temperature taken is higher than +80
o
C (176°F)
(1)
In ear/forehead mode: Temperature taken is lower than +34
o
C (93.2°F)
(2)
In surface mode: Temperature taken is lower than –22
o
C (-7.6°F)
Please select the target within specifications. If a malfunction still exists,
please contact the nearest retailer.
Device cannot be powered on to the ready stage.
Change with a new battery.
Warranty:
Warranty :12 months
Manufacture Date
：
as the serial number( please open the battery cover, it is shown on the inside of the device.)
Ex.SN:E912A000001, the first “E” is External, the second number “9” is the manufacture year 2009, the third and the fourth number “12” is the manufacture month, the
others is the serial number.
Note: The thermometer is calibrated at the time of manufacture. If at any time you question the accuracy of temperature measurements, please contact the
dealers or nearest service address.
Please read the instructions for use
BF type applied part
Portable and mobile RF communication equipment can affect medical electrical equipment such as this product. This device complies with
CISPR 11 group 1, Class B. During measurement it is recommended to keep at least 1.5 meter separation between this device and the
surrounding electrical devices. If interference occurs, please increase the separation further or turn off the electrical equipment in the
vicinity. For detailed description regarding the EMC precautions you need to take, please contact our authorized representative or us on
address as given below.
Radiant Innovation Inc. Http://www.radiantek.com.tw
Add: 1F, No.3, Industrial East 9
th
Road, Science-Based Industrial Park,
HsinChu, Taiwan 300.
Medical Technology Promedt Consulting GmbH
Add: Altenhofstrasse 80, D-66386 St. Ingbert, Germany
