Radialight MANTRA 15, Инструкция по установке и эксплуатации

Страница: 11 / 20

11
reach the adjustment knobs.
• This heater must be correctly installed in compliance with the re-
gulations in force in the country of installation.
• In order to avoid hazards due to inadvertent resetting of the ther-
mal cutout, this appliance must not be supplied through an ex -
ternal switching device, such as timers, programmers, separate
remote-control system or connected to a circuit that is regularly
switched on and off.
• WARNING: Do not use this heater in small rooms when they
are occupied by persons not capable of leaving the room on their
own, unless constant supervision is provided.
• WARNING: Operate this heater at a distance of 1m from
textile, curtains and/or any flammable materials.
• Notice: If you have purchased a new product or if you have left
your product without function for a long period, when switching it
on you may smell an odour. This is due to the deposit of dust or
impurities on the surface of the heating element. The smell is not
dangerous for health and it will disappear in a few minutes.
2. s
afe Positioning and wheels fixing
• In bathrooms never install or use the equipment within zones 0 or 1 shown in figure 1.
• The regulating knobs must never be accessible to people in a bath or shower.
• To fix the wheels proceed as follows:
- Snap the wheels in the plastic supports (picture 2-A);
- Slide the wheels supports and fix them to the brackets on the lower part of the heater (picture 2-B);
- Fix the wheels supports with the screw provided (picture 2-C).
• Always respect the minimum distances from any inflammable object indicated in figure 3.
• Never cover the product with fabrics or other objects (figure 4).
3. u
sing the heater
• This model has 2 knobs, one for adjusting the operating power and one for the thermostat (picture 5).
• The power regulator can be used to select 3 different operating modes for the product:
Switch MANTRA 15 MANTRA 20
0
OFF OFF
1
750W OPERATION 1200W OPERATION
2
1500W OPERATION 2000W OPERATION
• After selecting the desired power, turn the thermostat knob clockwise until you hear a “click” and the product
starts working and the led on the top right side of the front grid lights up.
• The thermostat maintains the ambient temperature required by switching the equipment on and off automatically.
The more the thermostat knob is turned clockwise to a position with a higher number, the higher the temperature
ensured. The maximum thermostat position corresponds to about 35°C, while the minimum (*) is about 5°C.