Radialight ICON 10, Руководство по эксплуатации

Страница: 28 / 104

To switch off the radiator, hold down the
Switch on / Stand-by key for at least 3
seconds.
Switching the radiator off using the
rocking switch on its side for more than
30 minutes results in the loss of all data
saved (date, time, temperature setting,
etc.).
6.2.3 Selecting the operating mode
Pressing the "M" key repeatedly allows
you to select the operating mode you
require.
The operating modes are activated in the
following order:
→ → → →
Once 30" has elapsed since the "M" key
was last pushed, the operating mode
activation sequence begins from the
beginning again, to make it quicker to
switch from any mode to Comfort mode.
Icon Description When used
Comfort When at home. The radiator works to maintain the comfort temperature set.
Eco
When you are away from home for short periods (from 2 to 48 hours) or you
are sleeping. The radiator works to maintain the eco temperature set and
save energy.
Anti-freeze
When you are away from home for long periods (more than 48 hours). The
temperature is automatically set at 7±3°C and cannot be changed.
Programme P1
When you want preset programmed operation, suitable for those that do not
work from home. THIS PROGRAM CAN ALSO BE CUSTOMIZED
FOLLOWING THE INSTRUCTIONS LISTED IN PARAGRAPH 6.2.6.
Pilot wire
When checking operation of the radiator, using an external control unit with a
pilot wire.
6.2.3.1 Description of preset programmes
00:00 06:00 08:00 12:00 14:00 17:00 24:00
Monday-Friday

Saturday-Sunday


= temperature "COMFORT"

= temperature "ECO"

= temperature anti-freeze
The program P1 can be customized following the instructions listed in paragraph 6.2.6.
To set the temperatures (valid for all programmes):
- Select Comfort operating mode and set the relevant temperature.
- Select Eco operating mode and set the relevant temperature.
- Select the programme required P1.
Please note : When you select programme P1 without ever having set the current date and time, the system will
automatically switch to the regulation mode explained in paragraph 6.2.5.
6.2.3.2 Using the pilot wire
If a connection cable is supplied without a plug, the radiator can also be controlled using specific programmers.
The comfort temperature used in Pilot Wire mode is set, as already explained for the preset programmes, by going to
Comfort mode first, using the "M" key and then selecting the value required using the "+" and "-" keys.
Please note: In Pilot Wire mode, the Eco temperature is always equal to the Comfort temperature less 3,5°C.