Radial Engineering PZ-PRO Скачать руководство пользователя страница 15

Страница: 15 / 16

PZ-Pro™

Radial Engineering Ltd.

SPECIFICATIONS

Audio Circuit Type: .................................................................... Proprietary active circuit

Number of channels: ....................2x Inputs, Mono Pre and Post EQ XLR balanced Out

Frequency Response: ...................................................................20Hz - 20kHz ±0.5dB

Input Gain: .................................................. +20dB (Instrument Input), +55dB (Mic Input)

Boost Gain: .....................................................+10dB (PZ Boost) +15dB (Variable Boost)

Maximum Input - Instrument: ................................................................................ +20dBu

Maximum Input - Microphone: .................................................................................. 0dBu

Clip Level: ......................................................................................+10dBu @ XLR output

Total Harmonic Distortion: ............................. <0.005% (+4dBu, 20Hz-20kHz, unity gain)

Input Impedance: ........... 220k Ohms at input jack (10Meg Ohms when PZ Boost active)

Output Impedance - XLR: .................................................................................150 Ohms

Output Impedance - 1/4" Amp Out: .................................................................... 1k Ohms

Output Impedance - Tuner Out: ....................................................................... 2.6k Ohms

Noise: ......................................................................................................................-91dB

General

Construction: .............................................................................................14-gauge steel

Size: ......................................................... 9.10"L x 5.32"W x 1.82"H (231 x 135 x 46mm)

Weight: ......................................................................................................5.0lbs (2.27kg)

Power: ......................................................................15VDC, 400mA (center pin positive)

FCC Approval: ................................................Complies with section 15 of the FCC rules

Conditions: .............................For indoor use at temperatures b5°C and +40°C

Warranty: .................................................................................Radial 3-year, transferable

Specifications are subject to change without notice

In order to meet Electromagnetic and Safety Compliance requirements Radial

Engineering is recommending to use the PZ-Pro product with the provided

R800 9415 00 power adapter, Model: GME6A-150040FX, Input: 100-240V, 50-60Hz,

0.25A, Output 15V, 0.4A, I.T.E.Power Supply, considering all Electromagnetic and

Safety compliance was performed using only this power adapter mentinoned above

Содержание PZ-PRO

















Результаты поиска

Содержание PZ-PRO

Отзывы:

Похожие инструкции для PZ-PRO

Бренды по названию

Популярные бренды

Radial Engineering PZ-PRO, Руководство пользователя

Результаты поиска

Содержание PZ-PRO

Отзывы:

Похожие инструкции для PZ-PRO

Бренды по названию

Популярные бренды