Radial Engineering Ltd.
DiNET DAN-TX™
True to the Music
True to the Music
®
®
Radial Engineering Ltd.
DiNET DAN-TX™
Dan-TX WiTH UnBalanCeD ConSUmer aUDio
When using the DAN-TX with consumer audio devices, typically either
the RCA connectors or the mini 3.5mm connector will be used, however,
the ¼” inputs can also be employed. With the LINE/INST switch set to
LINE, the DAN-TX will accept consumer line level signals such as those
from a CD player, laptop, tablet, or smartphone. Stereo keyboards can
also be connected to the DAN-TX in this mode. The TRIM control can
be used to fi ne tune the level, and the PAD can be engaged should
further attenuation be required. Only one set of inputs should be used
at a time, as they will all sum together to the left and right Dante outputs
over Ethernet. To connect more than one device at a time to the Dante
network, use multiple DAN-TX units.
Dante Network
Computer running
Dante Controller
for setup
Computer running
Dante Controller
for setup
Recording Interface
Dan-TX WiTH ProfeSSional line-leVel eQUiPmenT
The DAN-TX can also be used with professional audio and broadcast
equipment such as mixing consoles and recording interfaces, with the
ability to handle extremely hot signal levels of up to +28dBu. The ¼”
connectors accept balanced TRS inputs, with +/-10dB of gain available
on the TRIM control, along with a -18dB pad to accommodate a wide
range of input levels. When the TRIM control is set to 12 o’clock and the
PAD is engaged, +18dBu = 0dBFS. Without the PAD engaged, or when
the DAN-TX is set to Instrument mode, 0dBu = 0dBFS. Ensure the LINE/
INST switch is set to LINE when connecting pro audio equipment to the
inputs of the DAN-TX.
Dante Network
7
8
