56
EN
Installation of the door bracket
4.
Fix the door bracket to the garage door.
Mounting materials: 4 x self-tapping screw 6.3 x 16
5.
Slide the profile slide to the front and attach the connector
to the door bracket with the enclosed bolt.
6.
Secure the bolt against slipping out by attaching the lock
washer.
7.
Check the correct door balance several times by hand.
Open and close the garage door several times and check
whether the door moves smoothly.
IMPORTANT
When the door is opened fully the profile slide clicks into place on the driver of
the sliding rail. If you wish to close the door by hand, you must first pull the rope
of the internal release mechanism to decouple the door from the opener again.
