manualshive.com logo in svg

RADEMACHER RolloTron Swivel Winder Comfort 1500, Руководство по эксплуатации и сборке

Поделиться
Скачать
RADEMACHER RolloTron Swivel Winder Comfort 1500 Скачать руководство пользователя страница 49

49

EN

8. 

Remove the reel compartment cover and check the 
position of the fastening hook.

9. 

If necessary, move the fastening hook into an easily 
accessible position. 

9.1 

For this, plug the mains cable into the RolloTron Swivel 
Winder Comfort and into the socket.

18.  Removing the RolloTron Swivel Winder Comfort (e.g. in the event of a move)

i

 CAUTION!

There is a risk of injury from the reel.

 

◆

Never reach into the reel compartment when the 
motor is running. 

 

◆

Always remove the mains plug before touching the 
reel compartment.

10. 

Finally, remove the mains plug again from the socket.

11. 

Release the belt from the fastening hook and pull 
it out of the RolloTron Swivel Winder Comfort from 
above.

12. 

Finally, unscrew the wall bracket.

Содержание RolloTron Swivel Winder Comfort 1500





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды