manualshive.com logo in svg

RADEMACHER RolloTron Swivel Winder Comfort 1500, Руководство по эксплуатации и сборке

Поделиться
Скачать
RADEMACHER RolloTron Swivel Winder Comfort 1500 Скачать руководство пользователя страница 48

48

EN

18.  Removing the RolloTron Swivel Winder Comfort (e.g. in the event of a move)

1. 

Remove the cover plate from the setting buttons.

2. 

 

M

 + 

OK

 + 

+

 + 

-

  

Erase all settings. Simultaneously press and hold the 

buttons for 4 seconds.

3. 

 

Fully close the roller shutters.

4. 

 

Continue to press and hold the down button.

5. 

When doing so, pull out the belt as far as possible from 
the top of the RolloTron Swivel Winder Comfort.

6. 

 

 

 

Remove the mains plug from the  

 

 

 

socket and the small appliances plug  

 

 

 

from the RolloTron Swivel Winder  

 

   Comfort.

i

7. 

Press the assembly locking device on the back part and 
pull remove the RolloTron Swivel Winder Comfort from 
the wall bracket by pulling it downwards.

Assembly locking device

Содержание RolloTron Swivel Winder Comfort 1500





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды