RADEMACHER 3650 00 12, Инструкция по электрическому подключению и пусконаладке

Страница: 79 / 112

79
EN
25.2 Menu 9.2 - Configuring the motor run time
1.
Open menu 9.2 .
Measuring the run time directly with the Troll Comfort:
2.
Press the button until the roller shutter
stops at the lower end point.
3.
Press the button until the roller shutter
stops at the upper end point and then
release it again.
The run time will be timed and stored during
the up cycle.
4. OK
Back to system menu.
Measuring and entering the run time manually:
1.
Fully close the roller shutter.
2.
>> Subsequently move the roller shutter to the
upper end point and measure the time
required.
3.
Enter and confirm the measured run time
(e.g. 15 sec.) in menu 9.2 .