RADEMACHER 3650 00 12, Инструкция по электрическому подключению и пусконаладке

Страница: 30 / 112

30
EN
8.1 Important information prior to the electrical
connection and installation
Setting the end points on the tubular motor
You must configure the end points of the tubular motor before
installing it and making the final electrical connection otherwise
malfunctions may occur.
It is essential that you set both end points of the tubular motor if no end
points have been set yet.
Parallel connection of electronic tubular motors
A maximum of 3 tubular motors can be connected in parallel to the Troll
Comfort or Troll Comfort 3D (e.g. RADEMACHER electronic tubular motors).
In order to do so, follow the information in the instruction
manual of the tubular motor being used.
i
Parallel connection of mechanical tubular motors
A cut-off relay is required in order to connect mechanical tubular mo-
tors in parallel.
Requirements for blockage detection *
Blockage detection is only operational if a mechanical tubular motor is
connected.
Function of inputs E1 and E2 *
Both inputs can be configured independently of each other. You can
configure the functions of the inputs in menu 9.8.6, depending on the
required purpose of the connected signal transducers, see page 95.
You can obtain connection and circuit examples from our website at
www.rademacher.de
* not available for the
Troll Comfort 3D