33
EN
i
11. Deleting all settings (reset)
1.
Press and hold the disconnect button for approx.
5 seconds until the STATUS LED constantly lights up
red.
2.
All of the settings are deleted and reset to the default factory
settings and the logged-on DuoFern transmitters are automati-
cally logged off.
3.
The DuoFern 1-10V Controller is then reset to the default factory
settings.
A reset must be carried out to reset the DuoFern 1-10V Controller
to the default factory settings.
12. Dismantling
DANGER!
There is a risk of fatal electric shock when touching electri-
cal components.
◆
Disconnect all phases of the mains power lead and secure
it to prevent any reconnection. Check that the system is
de-energised.
1.
Log the DuoFern controller off from the DuoFern network.
2.
Ensure the mains power is current-free and open the
flush-mounted box.
3.
Disconnect the DuoFern 1-10V Controller and completely
remove it from the flush-mounted box.
i
