30
EN
i
9.1 Logging on and off via radio code
You can control the DuoFern 1-10V Controller directly using the ra-
dio code in order, for example, to be able to connect other DuoFern
transmitters to the DuoFern 1-10V Controller after installation. You
will find the radio code on the enclosed label and on the rear side
of the DuoFern 1-10V Controller.
i
Please note that the use of the radio code is limited
to 120 minutes after switching on the power supply
A detailed description on activating the radio code
function can be found in the instruction manual of
the DuoFern Manual Control and the HomePilot®.
